scissorsafe anchorage for
Work Restraint / Fall Restraint

A Temporary Work Restraint System will provide a high level of safety for workers when operating in areas with unprotected fall hazards and leading edges.

Temporary Work Restraint Systems consist of components that restrict the workers movement within a safe working zone, preventing them from reaching the fall hazard.

When installed the Work Restraint system provides a high level of safety and where four user’s can operate in a safe working zone.

Single Point Anchorage

Single Point Anchorage’s can be effective when an operative has work task’s in small isolated area’s , particularly effective in window openings or on balconies.

A personal protection equipment system for a single anchorage point will comprise a Scissorsafe Anchorage Tool, a Full Body Harness preferably with front and rear anchorage points and a connecting component with will be determined by the distance from the anchorage point to the work area.
An Adjustable Work Restraint Lanyard is limited to 2 metres in length, for greater distances an Adjustable Work Positioning Lanyard will be utilised in lengths of 3,5,7 and 10 metres.
Scissorsafe Anchor
Adjustable Work Restraint

Dual Point Anchorage for Horizontal Lifelines / Running Lines

Scissorsafe anchorage’s are linked to Temporary Horizontal Lifelines (also referred to as Running Lines ). The maximum length of the temporary lifeline is 20 metres, typically they will be positioned 3 metres from the leading edge running parallel to it which provides a safe working zone of 60 square metres.

Four workers have complete freedom of movement along the lifeline without needing to transfer from one anchor point to another. This allows them to pass equipment , materials and tools to each other or to any point in the safe working zone.

ScissorSafe Safety Harness
ScissorSafe Temporary Horizontal Lifeline
ScissorSafe Work Restraint Sling Assembly
ScissorSafe Anchors
ScissorSafe Adjustable Work Positioner