The Adjustable Work Positioner is the link between a Scissorsafe Anchorage Point or an Overhead Lifeline supported on Scissorsafe Anchorages and the users Harness.
it is manufactured from hard-wearing 12mm kermantle rope, with a stainless steel rope adjuster connected to a 1 metre rope lanyard.
Certified connectors are included that attach the Adjustable Work Positioning Lanyard between the user and the Anchorage.
It is designed specifically for multi use as it can be connected into a single Scissorsafe Anchorage Point for work restraint in an isolated area using the 10mm Karabiner that locks the Anchor, or by the large karabiner which allows it to run freely along a horizontal lifeline without causing friction wear on the line. It is connected to the users harness from the 10mm karabiner on the short lanyard.
When connected, controlled movement between the Anchorage Point and the leading edge of the structure is achieved allowing the user to operate in a Work Restraint System. The user retains tension between anchorage and harness by adjusting the length of rope between himself and the anchorage point, relative to the distance he is working from the leading edge, using the grab adjuster which allows one-way adjustment and keeps him in constant tension so that his forward movement is restricted from the fall risk.
When connected to an overhead lifeline or running line, it allows the user movement along its whole length, ( max 20 metres). For isolated work operations where less mobility is needed, the user can connect directly to an Anchorage Point.