Temporary Horizontal Lifelines

The Temporary Horizontal Lifeline is the primary anchorage connector in any Work Restraint System and is used to link two 15kN rated anchorage points together. It provides a lightweight and easily installed anchorage solution for leading edge environments i.e decking of formwork or installing facade systems to a structures perimeter.

Temporary Work Restraint Systems consist of components that allows movement within a safe working zone, without needing to transfer from one anchor point to another. When planned and installed the system provides a high level of safety and creates an area where four user’s can operative in a safe working zone and will consist of the following components:

  • Anchor Point – Webbing or Wire Rope Slings wrapped around column starter bars connected to a Temporary Horizontal Lifeline, maximum length 20 metres.
  • Connecting Device – Adjustable Work Positioning System, comprising a Lanyard, Rope Grab for adjustment and a length of Kermantle Rope providing the travel for the operative.
  • Safety Harness – with front & rear anchorage points
Ridgegear horizontal lifeline

Ridgegear Horizontal Lifeline for Formwork 20 mtr/ 4 Users

PRODUCT CODE

SCS020A

ACCREDITED TO

EN795

PRODUCT INFORMATION

Horizontal Lifeline with ratchet tensioner that adjusts and tensions the line to a maximum working length of 20metres with sewn loops
at both ends for connection of anchorage slings and connectors.. An Integral storage bag holds excess webbing and provides UV protection when the lifeline is not in use.
Two webbing slings provide anchorage by wrapping around columns or vertical rebar , connected to the Lifeline with 35kN rated karabiners.

The Temporary Horizontal Lifeline is the primary anchorage connector in any Work Restraint System and is used to link two anchorage points together. It provides a lightweight and easily installed anchorage solution for leading edge environments i.e decking out on formwork systems.

APPLICATION

The Temporary Horizontal Lifeline is the primary anchorage connector in any Work Restraint System and is used to
link two 15kN rated End- Anchorage Points together. 

KIT CONTAINS
  • x1 Horizontal lifeline (20 mtr) with ratchet tensing and storage bag
  • x2 Webbing anchorage slings
  • x2 End anchorage karabiners rated to 35kn
Download Data SheetDownload Data Sheet

Span-Set Horizontal Lifeline 20 mtr / 4 Users in Work Restraint

PRODUCT CODE

SCS020

ACCREDITED TO

EN795

PRODUCT INFORMATION

Consisting of a length of webbing that adjust’s to a maximum working length of 20m, an integral wear indicator for ease of inspection, sewn loops for connecting to anchorage slings or Scissorsafe restraint sling assemblies at each end and anIntegral storage bag for transport and stowage of excess webbing and UV protection when the lifeline is not in use.

A Scissorsafe Running Line assembly specifically designed for protecting facade installers consists of two pairs of anchorages locked into void formers up to a maximum of 20 metres apart. These are linked using a Work Restraint Link which connects to the lifeline using a large karabiner. This set-up is capable of absorbing end anchorage loads.

Scissorsafe Work Restraint Link’s transfer and evenly distribute the lifeline load into four pre-determined Scissorsafe anchorage points. Scissorsafe technicians will plot anchorage points onto the structures plan for efficient utilisation of Work Restraint equipment

Scissorsafe fall prevention components are supplied with clear user instructions and carry unique serial numbers for traceability.

Use this lifeline with:

  • Scissorsafe Anchorage Tool
  • Scissorsafe Work Restraint Sling Assembly
  • Scissorsafe Adjustable Work Positioned
  • Endurance Safety Harness with front & Rear attachment points
Download Data SheetDownload Data SheetDownload InstructionsDownload Instructions

Horizontal Lifeline 10 mtr/ 4 Users

PRODUCT CODE

SCS010

ACCREDITED TO

EN795

PRODUCT INFORMATION

Consisting of a length of webbing that adjust’s to a maximum working length of 20m, an integral wear indicator for ease of inspection, sewn loops for connecting to anchorage slings or Scissorsafe restraint sling assemblies at each end and anIntegral storage bag for transport and stowage of excess webbing and UV protection when the lifeline is not in use.

A Scissorsafe Running Line assembly specifically designed for protecting facade installers consists of two pairs of anchorages locked into void formers up to a maximum of 20 metres apart. These are linked using a Work Restraint Link which connects to the lifeline using a large karabiner. This set-up is capable of absorbing end anchorage loads.

Scissorsafe Work Restraint Link’s transfer and evenly distribute the lifeline load into four pre-determined Scissorsafe anchorage points. Scissorsafe technicians will plot anchorage points onto the structures plan for efficient utilisation of Work Restraint equipment

Scissorsafe fall prevention components are supplied with clear user instructions and carry unique serial numbers for traceability.

Use this lifeline with:

  • Scissorsafe Anchorage Tool
  • Scissorsafe Work Restraint Sling Assembly
  • Scissorsafe Adjustable Work Positioned
  • Endurance Safety Harness with front & Rear attachment points
APPLICATIONS

The Temporary Horizontal Lifeline is the primary anchorage connector in any Work Restraint System and is used to link two 15kN rated anchorage points together. It provides a lightweight and easily installed anchorage solution for leading edge environments i.e decking of formwork or installing facade systems to a structures perimeter.

Download Data SheetDownload Data Sheet
Checkmate Horizontal Lifeline

Checkmate Horizontal Lifeline

PRODUCT CODE

SCS020B

ACCREDITED TO

EN795 CLASS C

PRODUCT INFORMATION

Compact and economical temporary horizontal lifeline designed to span between fixed anchorage points for two users in work restraint.

Manufactured from 25mm low stretch water repellent and UV resistant polyester webbing with wear indicator. Max 20m up to two persons. Simple to install via ratchet style tensioner. Record style bag keeps equipment protected. Lightweight and portable 1.3kg Carbon steel zinc plated ratchet.

APPLICATIONS

Compact and economical temporary horizontal lifeline designed to span between fixed anchorage points for two users in work restraint.

Manufactured from 25mm low stretch water repellent and UV resistant polyester webbing with wear indicator. Max 20m up to two persons. Simple to install via ratchet style tensioner. Record style bag keeps equipment protected. Lightweight and portable 1.3kg Carbon steel zinc plated ratchet.

Download Data SheetDownload Data Sheet

Scissorsafe Anchorage to Lifeline Link

PRODUCT CODE

SCS050

ACCREDITED TO

EN795

APPLICATIONS AND PRODUCT INFORMATION

Anchor to Lifeline Anchorage Slings used to connect twin anchorage devices (certified to BS EN 795) to the terminating ends of a Temporary Horizontal Lifeline. Designed to even transfer and distribute the lifeline load into the anchors.
It consists of two lengths of durable webbing with oval connectors at the anchor end and a 50kN rated connector at the Lifeline end.

Scissorsafe technicians will plot anchorage points onto the structures plan for efficient utilisation of Work Restraint Lifelines.

Download Data SheetDownload Data Sheet